Skip to main content

Resilient Channel Basement Soundproofing

Resilient channel soundproofing for basement ceilings and walls in Utah. Decouples drywall to block footsteps and noise. Call (720) 885-2838.

About This Service

Resilient channel is the most effective way to soundproof a basement without ripping out framing. By screwing thin metal channels perpendicular to your ceiling joists or wall studs and then hanging drywall to the channel instead of the framing, sound vibrations are physically decoupled — footsteps, voices, music, and TV noise from the floor above are dramatically reduced. We install resilient channel correctly (spacing, screw lengths, and avoidance of short-circuits that ruin the system) and pair it with sound-rated drywall or insulation when the goal is a true home theater or quiet bedroom suite below grade.

Our Process

01

Plan the Assembly

We confirm your soundproofing goal — light noise reduction vs. home-theater isolation — and recommend the right channel, insulation, and drywall combination.

02

Insulate the Cavity

Mineral wool or fiberglass batts are installed between joists or studs to absorb airborne sound before it reaches the channel.

03

Hang Resilient Channel

Hat-shaped metal channels are screwed perpendicular to framing at 24" on center — only into the channel flange, never short-circuited through to a stud.

04

Mount Drywall to the Channel

5/8" drywall (or doubled 1/2" with damping compound for max isolation) is screwed only to the channel, with screws sized so they cannot reach the framing behind.

05

Seal, Tape & Finish

Perimeter gaps are caulked with acoustic sealant, then seams are taped, mudded, and finished to a paint-ready surface — texture matched if tying into existing rooms.

What's Included

  • Hat-channel decoupling on ceilings and/or walls
  • Mineral wool or fiberglass cavity insulation
  • 5/8" drywall or doubled board for max STC rating
  • Acoustic sealant at all perimeter gaps
  • Correct screw length — no framing short-circuits
  • Optional Green Glue damping compound between layers
  • Texture and paint to match adjoining rooms

Why Choose Us

  • Dramatically reduces footstep and impact noise from above
  • Blocks voice and TV bleed between basement and main floor
  • Done right the first time — most DIY installs short-circuit and fail
  • Pairs perfectly with our basement drywall scope
  • Quiet enough for a home theater, music room, or basement bedroom

Ready to Get Started?

Free estimates in person, by phone, or by photo. Most repairs completed same-day.

Get Free Estimate(720) 885-2838

Resilient Channel Basement Soundproofing — Frequently Asked Questions

It depends on the assembly. A basic single-layer drywall on resilient channel with insulation typically reaches around STC 50–55, which means normal speech and TV from the floor above becomes a low murmur and footsteps are noticeably softened. Doubled drywall with damping compound can reach STC 60+, which approaches home-theater isolation.

Yes — as long as the drywall hasn't been hung yet (or you're willing to tear it down). The channel mounts directly to your existing ceiling joists or wall studs, so we don't need to touch the framing. If drywall is already up, we'd remove it, insulate, install channel, and rehang.

For most basements, ceiling-only resilient channel handles the biggest complaint — footsteps and noise from the floor above. We recommend adding it to walls only when you're isolating a specific room (home theater, music studio, or a bedroom adjacent to a stairwell or mechanical room) where airborne sound through the walls is a real concern.

Yes. Resilient channel adds only about 1/2" of depth before the drywall — far less than a dropped ceiling. For basements already tight on headroom, this is the lowest-profile soundproofing option that actually works.

Get Started Today

Ready to fix those walls?

Free estimates — in person, by phone, or by photo. Most jobs completed same-day.

Mon–Sat, 8 AM – 8 PM.